Shelly Wave Shutter
Overview
Shelly Wave Shutter is a compact Z-Wave shutter controller designed for precise control of bi-directional AC motors. It allows you to automate and remotely control roller shutters, blinds, awnings, windows, pool covers, and similar motorised systems, while also providing power monitoring to track motor consumption.
Built on the Z-Wave 800 Series platform, Wave Shutter supports SmartStart inclusion, secure S2 communication, and mesh networking. It fits neatly behind wall switches and works with both momentary (push-button) and toggle switches, making it suitable for retrofit and new installations alike.
Key Features
• Z-Wave shutter controller for bi-directional AC motors
• 10 A per channel switching capacity
• Precise position control (open/close percentage)
• Venetian blind slat angle control
• Integrated power metering for the motor
• Supports push-buttons (momentary) and toggle switches
• Z-Wave 800 Series (S800) chipset
• SmartStart QR-code inclusion
• Security 2 Authenticated (AES-128 encryption)
• OTA firmware updates via compatible gateway
• Acts as a Z-Wave repeater in mesh networks
• Ultra-low idle power consumption (< 0.3 W)
What It Controls
• Roller shutters
• Blinds and screens
• Venetian blinds (including tilt/slat control)
• Awnings
• Windows
• Pool covers
• Any device powered by a bi-directional AC motor
Technical Specifications
Power & Switching
Power supply: 110–240 V AC, 50/60 Hz
Power consumption: < 0.3 W
Max switching voltage (AC): 240 V
Max switching current (AC): 10 A per channel
Power measurement: Yes
Z-Wave
Chipset: Z-Wave™ S800 (800 Series)
Frequency band (UK / EU): 868.4 MHz
Repeater function: Yes
Typical indoor range: Up to 40 m (environment dependent)
Max RF output power: < 25 mW
Protection & Environment
Overheating protection: Yes
Overload protection: Yes
Dry contacts: No
Operating temperature: −20 °C to +40 °C
Humidity: 30–70% RH
Physical
Mounting: In-wall (behind switch)
Dimensions (H × W × D): 42 × 37 × 16 mm
Installation Notes
• Designed for in-wall installation behind switches
• Intended for bi-directional AC motors only
• Not suitable for DC motors
• Supports both momentary and toggle switch inputs
• Power monitoring is based on motor load
• Requires a compatible Z-Wave gateway for setup and automation (not included)
• Acts as a repeater in standard Z-Wave mesh networks
In the Box
• Shelly Wave Shutter
• Quick start documentation