Shelly Wave Pro Dimmer 1PM – 1-Channel Z-Wave DIN-Rail Dimmer (Power Monitoring)
Overview
Shelly Wave Pro Dimmer 1PM is a single-channel Z-Wave smart dimmer designed for DIN-rail installation in consumer units and electrical cabinets. It uses trailing-edge dimming and includes built-in power monitoring, making it suitable for controlled lighting circuits where you want both dimming control and energy reporting via a compatible Z-Wave hub.
Key Features
• 1-channel DIN-rail Z-Wave dimmer (trailing-edge)
• Power monitoring (W) for the connected load
• Automatic dimming calibration
• Works with switch or push-button inputs
• Supports one-button or dual-button dimming control
• Adjustable minimum and maximum brightness limits
• Adjustable fade rate and transition time
• Z-Wave 800 Series (S800) chipset
• SmartStart inclusion support
• Security 2 Authenticated (S2)
• OTA firmware updates (via compatible gateway)
• Acts as a Z-Wave repeater (mesh)
Technical Specifications
Power Supply: 110–240 V AC, 50/60 Hz
Power Consumption: < 0.3 W
Dimming Type: Trailing edge
Power Measurement: Yes
Max Output Power: 200 W
Z-Wave Chipset: Z-Wave S800 (800 Series)
Frequency Band (UK/EU): 868.4 MHz
Repeater Function: Yes
Typical Indoor Range: Up to 40 m (environment dependent)
Max RF Power: < 25 mW
Mounting: DIN rail
Dimensions: 94 × 19 × 69 mm
Weight: 75 g
External Protection (recommended): 10 A (B or C curve), 6 kA interrupt rating, Energy limiting class 3
Operating Temperature: -20 °C to 40 °C
Humidity: 30–70% RH
Max Altitude: 2000 m
Installation Notes
• DIN-rail device intended for installation inside a breaker box / electrical cabinet
• Trailing-edge dimming: intended for compatible dimmable lighting loads (confirm bulb/driver compatibility)
• Calibration is required when first installed and whenever the connected dimmable load is changed
• Includes safety protections (overheat, overcurrent, overvoltage) that can shut down output if triggered
• Requires a compatible Z-Wave gateway for setup and normal operation (not included)
• Acts as a repeater in standard Z-Wave mesh networks
In the Box
• Shelly Wave Pro Dimmer 1PM
• Quick start guide