Shelly Wave Pro 1 – 1-Channel Z-Wave DIN-Rail Smart Relay (Dry Contacts)
Overview
Shelly Wave Pro 1 is a professional-grade, single-channel Z-Wave smart relay designed for DIN-rail installation inside electrical cabinets and breaker boxes. It provides reliable on/off control for lighting circuits, appliances, and automation systems in both residential and commercial environments.
The device features potential-free (dry contact) outputs, allowing it to control a wide range of low- and high-voltage circuits independently of the power supply. Built on the Z-Wave 800 Series platform, it supports secure communication, SmartStart inclusion, and mesh networking when paired with a compatible Z-Wave gateway.
Key Features
• 1-channel DIN-rail Z-Wave smart relay
• Rated up to 16 A on a single output
• Potential-free (dry contact) relay for flexible voltage control
• Suitable for lighting, appliances, gates, boilers, and automation circuits
• Z-Wave 800 Series (S800) chipset
• SmartStart for fast, QR-based inclusion
• Security 2 Authenticated (AES-128 encryption)
• OTA firmware updates via compatible Z-Wave gateway
• Acts as a Z-Wave repeater in mesh networks
• Extremely low idle power consumption (< 0.3 W)
Technical Specifications
Power & Switching
Power supply: 110–240 V AC ±10%, 50/60 Hz
Power consumption: < 0.3 W
Max switching voltage (AC): 240 V
Max switching voltage (DC): N/A
Max switching current (AC): 16 A
Dry contacts (potential-free): Yes
Z-Wave
Chipset: Z-Wave S800 (800 Series)
Frequency bands (region dependent):
– 868.4 MHz (EU / UK)
Repeater function: Yes
Indoor range: Up to 40 m (environment dependent)
Max RF output power: < 25 mW
Protection & Environment
Overheating protection: Yes
Voltage protection: No
Current protection: No
Max power protection: No
Operating temperature: −20 °C to 40 °C
Humidity: 30–70% RH
Physical
Mounting: DIN rail
Dimensions (H × W × D): 94 × 19 × 69 mm
Weight: Approx. 73 g
Installation Notes
• Designed for DIN-rail mounting inside electrical cabinets and breaker boxes
• Uses dry contacts, allowing control of circuits independent from supply voltage
• Requires a neutral and live supply to power the device
• Suitable for professional installations; recommended to be installed by a qualified electrician
• Requires a compatible Z-Wave gateway for configuration and operation (not included)
• Acts as a repeater in standard Z-Wave mesh networks
In the Box
• Shelly Wave Pro 1
• Quick start documentation