Shelly Wave i4 DC
£29.99
1 in stock
Overview
The Shelly Wave i4 DC is a Z-Wave input controller designed to convert up to four physical switch inputs into smart automation triggers. Instead of switching loads directly, it reports button presses and input events to your Z-Wave smart home system, allowing switches or buttons to control other devices, scenes, or automations.
Powered by low-voltage DC (5–24 V) and built on the Z-Wave 800 Series chipset, the module provides reliable communication while maintaining extremely low power consumption. It supports multiple press actions per input, making it suitable for advanced automation control panels or multi-function wall switches.
Key features
- Four digital inputs for switch or push-button connections
- Input controller only with no relays or load switching
- Supports short press, double press, and long press actions
- Up to 12 actions or scenes across four inputs
- Supports Z-Wave associations for direct device control
- Extremely low power consumption (< 0.3 W)
- Z-Wave 800 Series (S800) chipset
- SmartStart support for quick device inclusion
- OTA firmware updates via compatible Z-Wave hubs
- Security 2 (S2) authenticated encryption
Product information
Use cases
- Smart Wall Switch Automation
- Convert traditional wall switches into smart automation triggers for controlling lights, scenes, or devices through a Z-Wave system.
- Multi-Button Control Panels
- Create custom control panels where each button or switch can trigger different automations or scenes.
- Device and Scene Triggering
- Use multiple press actions to trigger different smart home routines such as lighting scenes, heating changes, or security modes.
Technical specifications
Power
Power Supply
5–24 V DC
Power Consumption
< 0.3 W
Z-Wave
Protocol
Z-Wave Plus
Frequency Band
868.4 MHz (UK/EU)
Chipset
Z-Wave S800 (800 Series)
Security
S2 Authenticated
Repeater Function
Yes
Typical Indoor Range
Up to 40 m
Maximum RF Power
< 25 mW
Inputs
Number of Inputs
4
Physical
Dimensions
42 × 37 × 16 mm
Terminal Torque
0.4 Nm
Conductor Size
0.5–1.5 mm²
Conductor Strip Length
5–6 mm
Environmental
Operating Temperature
-20 °C to 40 °C
Humidity
30–70% RH
What’s included
- Shelly Wave i4 DC
