reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3)
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 2
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 3
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 4
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 5
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 6
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 7
reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3) - Image 8

reTerminal E1002 – 7.3″ Full-Colour ePaper Display (ESP32-S3)

£114.99

Out of stock

Categories: , , Brand:

Overview

reTerminal E1002 is a 7.3″ full-colour open-source ePaper display powered by an ESP32-S3, designed for ultra-low-power dashboards, visual information displays, and development projects. It ships fully assembled with a built-in battery and enclosure, making it ideal for colourful smart home dashboards, digital frames, office displays, and embedded development.

The device runs SenseCraft HMI firmware out of the box for no-code dashboard creation, while also supporting ESPHome for Home Assistant dashboards, TRMNL e-ink dashboards, and custom development using Arduino or ESP-IDF. Its ultra-low power design enables battery life of up to three months, making it well suited to static dashboards and information displays.

Key features

  • 7.3″ E Ink Spectra 6 full-colour ePaper display (800 × 480)
  • ESP32-S3 processor with 8 MB PSRAM
  • Ultra-low power operation with up to 3-month battery life
  • Pre-installed SenseCraft HMI firmware for no-code dashboards
  • Supports ESPHome for Home Assistant dashboards
  • Compatible with TRMNL e-ink dashboards (license required)
  • Wi-Fi and Bluetooth connectivity
  • Built-in temperature and humidity sensors
  • MicroSD card support for local storage
  • Fully open-source hardware and software
  • Enclosed device with included desk stand

Product information

Use cases
  • Colour Smart Home Dashboard
  • Display colourful Home Assistant dashboards showing weather, devices, energy usage, and system status.
  • Digital Photo or Information Frame
  • Use the colour e-ink display for calendars, photo frames, status boards, or meeting schedules.
  • Low-Power Development Platform
  • Build custom dashboards or embedded projects using the ESP32-S3 platform.
Technical specifications
Processor
Chipset
ESP32-S3
PSRAM
8 MB
Storage
Flash
32 MB
MicroSD Support
Up to 32 GB (FAT32)
Display
Type
7.3″ full-colour ePaper (E Ink Spectra 6)
Resolution
800 × 480
Connectivity – Wi-Fi
Protocol
802.11 b/g/n (2.4 GHz)
Connectivity – Bluetooth
Protocol
Bluetooth 5.0
Sensors
Temperature Sensor
Yes
Humidity Sensor
Yes
Audio
Buzzer
Yes
Microphone
Footprint present (not enabled by default)
Power
Battery
2000 mAh rechargeable
Input
USB-C, 5 V / 1 A
Environmental
Operating Temperature
0 °C to 40 °C
Physical
Dimensions
176 × 120 × 53 mm (with stand)
Thickness
17 mm (without stand)
What’s included
  • reTerminal E1002 ePaper Display
  • USB Type-C cable
  • Display stand with screw
  • Screwdriver

Related products